Tubing Connectors and Fittings
AVANTOR MASTERFLEX (VWR LLC) Y-CONNECTORS PP 3/16IN 100/PK
Masterflex Fitting, Polypropylene, Y-Connector, Hose Barb Union, 3/16IN ID; 100/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) Y-CONNECTORS PP 1/8FTFT 10/PK
Masterflex Fitting, Polypropylene, Y-Connector, Hose Barb Unions, 1/8IN ID; 10/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TEE B/T 90 10/PK
Masterflex Fitting, Polypropylene, Tee, Hose Barb Union, 3/4IN ID; 10/PK, Avantor
Bia Separartions Inc ADAPTERS PEEK TC 25MM TO 10-32
Adapters PEEK, TC 25 mm to 10-32 UNF cone female (pack of 2)
Beckman Coulter 29 mm Polypropylene Tube Adapter for 50 mL Round-Bottom Tubes - fits common Beckman rotors
Polypropylene adapter sleeve designed to hold a single 50 mL round-bottom tube (fits up to 29 mm diameter) and permit use of non-manufacturer tubes in compatible centrifuge rotors. The adapter secures the tube for stable pelleting and sample processing in fixed-angle and swinging-bucket rotors.
- Holds one 50 mL round-bottom tube.
- Fits tubes up to 29 mm diameter.
- Polypropylene construction for chemical resistance and durability.
- Packaged as a single adapter.
- Adapts non-standard tubes for use in compatible fixed-angle and swinging-bucket rotors.
Ace Glass, Inc. Ferrule, PTFE, 1/2 inch ID center hole, use with #15Ace-Thred™; bushings, PK/12
Ferrule, PTFE, 1/2 inch ID center hole, use with #15Ace-Thred™; bushings, PK/12
Chemglass Life Sciences 12/3 O-Ring Ball Joint, Clamp Size: 12, O-Ring Size: 011, Tubing OD: 8mm
12/3 O-Ring Ball Joint, Clamp Size: 12, O-Ring Size: 011,Tubing OD: 8mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints. Supplied complete with one Viton o-ring of the listed size.
Chemglass Life Sciences 35/20 O-Ring Ball Joint, Clamp Size: 35, O-Ring Size: 120, Tubing OD: 21.70-22.30mm
35/20 O-Ring Ball Joint, Clamp Size: 35, O-Ring Size: 120,Tubing OD: 21.70-22.30mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints. Supplied complete with one Viton o-ring of the listed size.
Chemglass Life Sciences O-Ring Joint, 5mm ID, 8mm Tube OD , O-Ring Size: 110, Clamp Size: 12
O-Ring Joint, 5mm ID, 8mm Tube OD , O-Ring Size: 110, Clamp Size: 12. Joint has an o-ring groove to accept the listed o-ring size. Provides for a grease-free, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Chemglass Life Sciences Distilling adapter, Double, 24/40 Joint, 6mm PTFE Stopcock, 1/2" Swagelock
Distilling adapter, Double, 24/40 Joint, 6mm PTFE Stopcock, 1/2" Swagelock. Compact and simple distilling adapter for use with Chemglass process reactors. Vapor flows upward freely and distillate is collected in to the small bowl below the joint and through the stopcock into a distilling receiver. Adapter has a lower inner joint and is available with one or two top outer joints. Lower stopcock is either a 6mm or a 10mm PTFE with a 1/2¿ or 3/4¿ OD distillate takeoff for use with a compression fitting and TFE tubing. Adapter is 6¿ overall wide with joints offset 95mm center to center.
Chemglass Life Sciences Adapter, Connecting, 24/40 Top Outer, 29/42 Lower Inner, Reducing
Adapter, Connecting, 24/40 Top Outer, 29/42 Lower Inner, Reducing. Used to connect dissimilar standard taper joint sizes. Lower inner joint is larger in size than the top outer joint.
Chemglass Life Sciences 28/12 O-Ring Ball Joint, Clamp Size: 28, O-Ring Size: 116, Tubing OD: 16mm
28/12 O-Ring Ball Joint, Clamp Size: 28, O-Ring Size: 116,Tubing OD: 16mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints. Supplied complete with one Viton o-ring of the listed size.
Chemglass Life Sciences 28/15 O-Ring Ball Joint, Clamp Size: 28, O-Ring Size: 116, Tubing OD: 18.80-19.20mm
28/15 O-Ring Ball Joint, Clamp Size: 28, O-Ring Size: 116,Tubing OD: 18.80-19.20mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints. Supplied complete with one Viton o-ring of the listed size.
Chemglass Life Sciences 12/30 Inner Joint, Full Length, on 10mm OD x 1.5mm W tubing
12/30 Inner Joint, Full Length, on 10mm OD x 1.5mm W tubing. Standard Taper ground Inner Joint, Full Length.